Potassium hydroxide this material, we are almost not used in daily life, so the understanding of the material is limited to book knowledge, the actual contact is not much. So let's talk about issues like potassium hydroxide flame retardancy and slicing standards?

　　氫氧化鉀阻燃作用

　　氧化鉀在工業上也叫活性阻燃劑、鈉膠。根據它的結構特性，可以發現氧離子近似為立方面心緊密堆積，Al3+不規則地分布在由氧離子圍成的八面體和四面體空隙之中。γ型阻燃劑不溶于水，能溶于強酸或強堿溶液，將它加熱1200就全部轉化為α型阻燃劑。

　　氧離子為六方緊密堆積，晶格能很大，故熔點、沸點很高。α型阻燃劑不溶于水和酸，工業上也稱鈉氧，是制金屬鈉的基本原料；可作研磨劑、阻燃劑、填充料等；高純的α型阻燃劑還是生產人造剛玉、人造紅寶石和藍寶石的原料。

　　Flame retardancy of potassium hydroxide

　　Potassium oxide in the industry is also known as active flame retardant, sodium glue. According to its structural characteristics, it can be found that oxygen ions are closely packed in a vertical center, and Al3+ is irregularly distributed in the octahedral and tetrahedral Spaces surrounded by oxygen ions. γ type flame retardant insoluble in water, soluble in strong acid or alkali solution, it will be heated to 1200 all converted into α type flame retardant.

　　Oxygen ions are packed tightly hexagonal, lattice energy is very large, so the melting point, boiling point is very high. α type flame retardant is insoluble in water and acid, also known as sodium oxygen in the industry, is the basic raw material of metal sodium; Can be used as abrasive, flame retardant, filling material, etc. High purity α -type flame retardants are also used in the production of artificial corundum, rubies and sapphires.

　　氫氧化鉀切片標準

　　Potassium hydroxide section standard

　　1、切片之后的產品斷面位置應該確保是比較完整的，沒有一些比較明顯的缺口凸起等情況，而且表面因?yàn)榍衅幚矶a(chǎn)生的刀痕還有裂紋等都是比較少的。

　　First of all, the section position of the product after slicing should ensure that it is relatively complete, without some obvious gaps and protrusions, etc., and there are few knife marks and cracks on the surface due to slicing.

　　2、在進行切片的時候也是要求有比較高的準確度包括說切割出來的產品之間的厚度差等都是要求在一定范圍之內的，并且在切割結束之后不應該出現氫氧化鉀卷翹起來的情況。

　　when slicing is also required to have a relatively high accuracy, including the thickness difference between the products cut out is required within a certain range, and after the end of cutting should not appear potassium hydroxide roll up.

　　3、很多的產品在進行切片的時候都是會有一些不合格的產品，但是我們在進行加工的時候是需要盡可能的提高其合格概率的，這樣我們效率等都是會有顯著提高的。

　　Many products will have some unqualified products when they are slicing, but we need to improve the probability of qualification as much as possible when we are processing, so that our efficiency will be significantly improved.

　　4、我們在進行切片的時候可以選擇更高的設備進行處理，這樣我們再進行加工時候的效率也是會有所提高的。而且還可以減少原材料消耗的量。

　　When we slice, we can choose higher equipment for processing, so that the efficiency of processing will also be improved. It also reduces the amount of raw materials consumed.

　　使用氫氧化鉀時一定要嚴格對待，以上內容希望能夠大幅度的幫助您，如果您想了解其他方面更多的事項，那就來http://www.ebbsfleettaxis.com我們網站咨詢！

　　The use of potassium hydroxide must be strictly treated, the above content hope to be able to help you greatly, if you want to know more about other matters, then come to http://www.ebbsfleettaxis.com our website consultation!